Testers
VOLTAGE TESTING SCREWDRIVER
Fully insulated circuit tester conforming to VDE, GS and GE standards. A neon indicator lamp inside the handle illuminates when the live part of the circuit is detected. Suitable for use on circuits where current does not exceed 250V
SAFETEST BLOCK
For testing appliances without a plug, also a quick safe and convenient method of temporarliy connecting electrical flexible leads to AC mains supply
RCD ADAPTOR
For use in domestic or industrial premises where RCD protection is required, reset and test facility. Can be plugged into any 13A socket. Rated voltage 230-250V/AC Max load 3120W. Rated trip current 30mA. Trip speed 30mS Tested to BS1363 and IEC 61540
NON-CONTACT VOLTAGE TESTER
CatIII 1000V Non-contact voltage tester with integrated inspection lamp. Suitable for identifying live wires, broken wires and fault finding. Detection range 100-600V. Inspection light on one end and audible/visual indicators. 2xAAA batteries
SOCKET TESTER + BUZZER
The "Buzz-it" features an audible and LED indication of the correct wiring status of sockets to confirm the wiring is correct, therefore if there is no sound and any LEDs are unlit, there is a fault. Faults are identified by t
VOLTAGE/CONTINUITY TESTER
Sleek, ergonomic designed tester with a simple-to-use interface and easy testing procedures
PAT TESTER MI3311
Small, lightweight battery powered instrument. Ideal for getting into small, awkward places. Automatically performs Earth Continuity, Insulation, Sub-Leakage test and Polarity according to the appliance
VOLTAGE INDICATOR
600V AC/DC. LED indication at 50, 100, 200, 400V. DC polarity indication by LEDs. Robust PC/ABS case and double insulated lead. Large finger guards. Retractable pods to GS38. Complies with BS EN61243-3:2010 CAT IV 600V
VIPD LOCK-OUT KIT
16 piece voltage indicator kit containing a VI13800 volatge indicator and PD440 proving device, along with complete lock-out kit, supplied with soft carry case, enabling compliance with health and safety recommendations
TEK113 DELUXE 2 WIRE LEAD SET
TEK113 leads are a universal test lead set designed for all makes and model of multimeter. Each probe is fitted with a 500mA fast blow fuse and is rated up to 1000V CAT III. The screw on crocodile clips are rated up to 600V CAT III
COMBINED MVS DETECTOR
Combined metal, voltage and stud detector. This tool will detect live or dead electricity cables, water/gas pipes and wood studs or battens. Powered by a PP3 type battery (not supplied). A detailed instruction leaflet is enclosed with each tool.
